Backstitching is the simple technique that is done using the reverse sewing direction of your quilting machine to ensure that the seam’s beginning and end don’t arrive undone. It also strengthens your seam and is simple to do.
So, talking about whether to backstitch when machine quilting, the answer is confusing to understand. This article will answer this question in detail. It is the essential question asked during securing the threads in quilting. So, here is the detail on whether you are supposed to do backstitch in machine quilting or not. Let’s begin!
Do you Backstitch When Machine Quilting
No, you cannot backstitch when machine quilting. The reason for that is something you already know but never keep in mind.
It is one of the critical points for you to remember. Like you should not build up the thread, don’t stitch the quilt in place, and don’t back stitch and overlock. You just need to start quilting. Why? Because if you will backstitch or do any of these things, you will end up with a noticeable glob of thread on the back and top part of the quilt. You can not only view it but can also feel it as it will be a hard lump over your quilted surface. You Can start with your quilting without doing backstitching, and here is how. Let’s understand the beginning and end of the quilting technique.
Start your quilting by getting the bobbin thread upwards of your quilt. Then, with the help of that handwheel in your sewing machine, you need to drop your needle downwards to your side until it arrives upwards and is starting to dip back down again. This will ensure that the top thread you are using in quilting has made an entire rotation via the bobbin case and has the bobbin thread.
If not this, you can also have the needle up or down button in your sewing machine, and when you hit that button two times, it will bring the needle down and up. After doing so, you need to tug at the top thread of the quilt, and a loop should pop up; that will be the bobbin thread. You need to tug at that loop and then tuck both the threads under the darning foot so that they are out of your way. Remember, this step needs to be done.
Hence, bringing the bobbin thread upwards ensures that there are no nasty surprises left on the backside of your quilt. Also, tuck the threads under the foot, making it less likely to be sucked into the machines or become unthreaded. This was all about starting a quilt without using backstitching.
Most of the quilters also build the threads to secure their threads and clip off the tail of the thread immediately. Well, this is secure to do because wear and washing these knots come out, and the thread will unravel itself. So, just don’t build the thread, instead, start quilting and return to the thread tails after the block is completed in your quilt.
Also, to stop quilting, again, you need not backstitch, overlock, build-up thread, or stitch in one place. Instead, when you finish the quilting, just rotate your handwheel to bring the needle upwards, left the foot, and pull the block off the machine. After that, cut the thread with tails, and you will get the single thread on the upper side of your quilt and the single thread on the backside.
So, that is why you need not use backstitching while machine quilting. Instead of backstitching, overlock, and any other technique, you can tie, clip, or bury the threads on one side of your quilt. While tying the knot, leave a significant distance of thread from the surface and run the middle layer of the quilt. Without backstitching, the final quilt will come up neat and so prominent to consider